Operator Manual Owner manual

T23_AA_Operator Manual_2014 Revised 08/2014

Start Up & Operaon

Stopping the Water-Reel:

As the guncart nears complete retracon, it pushes the stop bar on the hose retenon bar, hing the stop lever,

shung down the turbine and stopping retracon. To ensure proper operaon of the hose retenon bar, check

the following and make adjustments if needed:

With the tube fully rewound onto the spool, check the posion of the actuator bolt. The bolts posion should

include a 1/4” space on the “stop side” of the mounng plate. See photos below for posion. If the gap is greater

or less than 1/4”, loosen the bolt and make the proper adjustments unl it is in the correct posion.

1/4” Gap