Owner Manual

SAFETY INFORMATIONASSEMBLY
3
Priot to assembly, lay out all parts on the floor and check against the parts list in this manual that all parts a re
present. If an parts are damaged or missing, please contact customer service.
Do not allow children to assist in assembly. This product when disassembled constains small parts that choldren
can choke on. Assembly of the bumper car should take approximately 30 minutes.
BATTERY SAFETY
• Charging the battery should only be done with adult supervision.
• Remove the battery from the car when charging. Do not charge the battery while it is in the bumper car,
• Do not mix old and new batteries when charging.
• Confirm the battery is in the correct polarity.
• Do not let the power terminal short circuit
INSTALLING THE UNIVERSAL WHEEL
1. Place the caster on the two screw holes in the middle column of the chasis.
2. Align the symmetry angle of the universal wheel with the screw hole and insert the M5*30 machine screw,
3. Inster the spring waser and M5 nut with a wrench and a screwdriver.