Instructions / Assembly

A
B
Step 43: Attach Transom Assembly
Part 2
D: Attach the top of each MOD 5 Pane Window to each (390) TB Support with 1 (S0) #8 x 7/8” Truss Screw per
window then attach bottom of windows to (051) Front Wall Panel and (052) Back Wall Panel with 2 (S0) #8 x 7/8”
Truss Screws per window. (g. 43.3 and 43.4)
E: From inside the assembly attach the upright of each Transom Assembly to (394) Wall Tie with 1 Corner
Bracket per upright using 3 (S0) #8 x 7/8” Truss Screws per bracket. Corner Bracket to be centred on uprights.
(g. 43.3 and 43.5)
Hardware
18 x #8 x 7/8” Truss Screw
S0
Other Parts
2 x Corner Bracket
MOD 5 Pane
Window
MOD 5 Pane Window
Fig. 43.4
Fig. 43.3
390
Fig. 43.5
Front or Back
Wall Panel
A
B
A
B
x 3 per
window
S0
Corner
Bracket
Right or Left
Upright
x 3 per
bracket
S0
92 [e-mail]