Instructions / Assembly

Hardware
A: Place (360) Front Roof Panel against (361) Back Roof Panel so the tops form a peak then tight to the inside
edge of the outside slats attach 1 Narrow Angle Bracket per slat with 2 (S0) #8 x 7/8” Truss Screws per bracket.
(g.36.1)
B: Attach the third Narrow Angle Bracket centred on the middle slat with 2 (S0) #8 x 7/8” Truss Screws.
(g.36.2)
Step 36: Large Roof Assembly
Part 1
S0
1 x Front Roof Panel 1¼ x 37 x 45”
1 x Back Roof Panel 1-1/4 x 32¼ x 45”
Wood Parts
360
361
6 x #8 x 7/8” Truss Screw
S0
360
361
Fig. 36.1
Fig. 36.2
Narrow Angle
Bracket
Flush
Flush
Centred
Other Parts
3 x Narrow Angle Bracket
81 [e-mail]