Instructions / Assembly

A: Attach 1 (220) Crowsnest Bottom Side ush to the inside edge of the panel posts on (040) Slide End
Panel and tight to the top of the oor support on (040) Slide End Panel using 3 (S11) #8 x 2” Wood Screws
per side. Notice pilot holes towards bottom of boards. (g. 22.1)
Step 22: Crowsnest Assembly
Part 1
Flush
Fig. 22.1
Notice holes
at bottom of
boards
2 x Crowsnest Bottom Side 3/4 x 5-1/4 x 14-3/4”
220
Wood Parts
6 x #8 x 2” Wood Screw
S11
Hardware
S11
Flush
Floor Support
x 3 per board
220
220
040
57 [e-mail]