Instructions / Assembly

1 x Left Access 1-3/8 x 2-1/2 x 57-53/64”
1 x Right Access 1-3/8 x 2-1/2 x 57-53/64”
4 x Tread 5/4 x 4 x 19-1/2”
022
021
020
Fig. 2.1
Wood Parts Hardware
Step 2: Access Ladder / Rockwall Assembly
Part 1
A: Place (020) Left Access on one side of 4 (022) Treads and (021) Right Access on the other side with the
grooves facing in. (g. 2.1)
B: Fit each (022) Tread into grooves on both (020) and (021) Access rails, make sure the top edge of the (022)
Treads are ush to the front of the Access rails. (g. 2.1 and 2.2)
C: Pre-drill pilot holes with a 1/8” drill bit and attach rails and treads together using 4 (S3) #8 x 2-1/2” Wood
Screws per tread. (g. 2.1)
16 x #8 x 2-1/2” Wood Screw
S3
Fig. 2.2
020
021
022
End View
Flush to
edges
Top Edge of Access Rail
Flush to
top edge
022
S3
S3
20 [e-mail]