Instructions / Assembly

Step 16: Attach Ground Stakes

A: Drive 2 (0318) Ground Stakes 10-1/2” into the ground against 2 (1771) Posts and (1770) SW Ground. Attach

to (1771) Posts using 2 (S3) #8 x 2-1/2” Wood Screws per ground stake. (g. 16.1 & 16.2)

MOVE FORT TO FINAL LOCATION. FINAL LOCATION MUST BE ON LEVEL GROUND

Fig. 16.1

Floor boards were

removed for clarity

2 x Ground Stake 1 1/4 x 1 1/2 x 14”

Hardware

Wood Parts

4 x #8 x 2-1/2” Wood Screw

WARNING: To prevent tipping

and avoid potential injury, stakes must

be driven 10-1/2” into ground. Digging

or driving stakes can be dangerous if

youdonotcheckrstforunderground

wiring, cables or gas lines.

Fig. 16.2

0318

1771

1770