Instructions / Assembly

1 x Left Access Rail 2 x 4 x 62-7/8”
1 x Right Access Rail 2 x 4 x 62-7/8”
4 x Ladder Tread 5/4 x 4 x 13-3/4”
8517
8146
8145
Fig. 2.1
Wood Parts Hardware
Step 2: Access Ladder / Rockwall Assembly
Part 1
A: Place (8145) Left Access Rail on left hand side of 4 (8517) Ladder Treads and (8146) Right Access Rail on
right hand side with the grooves facing in. (g. 2.1)
B: Fit each (8517) Ladder Tread into grooves on both (8145) and (8146) Access Rails, make sure the top edge of
the treads are ush to the front of the Access Rails. (g. 2.1 and 2.2)
C: Pre-drill pilot holes with a 1/8” drill bit and attach Rails and Ladder Treads together using 4 (S3) #8 x 2-1/2”
Wood Screws per tread. (g. 2.1)
Other Parts
2 x Swing Bracket
16 x #8 x 2-1/2” Wood Screw
2 x 5/16 x 1-1/2” Hex Bolt
 (5/16”lockwasher,5/16”atwasher,5/16”t-nut)
G1
S3
Fig. 2.2
Fig. 2.3
8146
8145
8517
Swing
Bracket
End View
G1
5/16” Lock
Washer
5/16” T-Nut
Flush to
edges
8146
D: Attach Swing Brackets to the inside top of (8145)
and (8146) Access Rails at angled edge using 1 (G1)
5/16 x 1-1/2” Hex Bolt (with lock washer, at washer
and t-nut) per bracket. Edge of Swing Bracket is ush
with edges of Access Rails. (g. 2.1 and 2.3)
Right Side
Left Side
Top of Ladder View
S3
5/16” Flat
Washer
8517
S3
22