Instructions / Assembly

Step 28: Cafe Wall Assembly

Part 1

A: Loosen the 4 bolts indicated on (2036) Cafe Ground, in g. 28.2, then tuck the Brookridge Tarp between the

(1931) Posts and (2036) Cafe Ground, down to the top of the bolts, 3/4” from top of board. (g. 28.1 and 28.2)

B: From outside the assembly, measure 1-1/2” up from the top of (2036) Cafe Ground, on both sides, and attach

tarp to both (1931) Posts, 1/2” in from the edge of the tarp, with 2 (S5) #8 x 1/2” Pan Screws (with #8 at washer).

(g. 28.2)

C: Measure 1-1/2” down from the top of the tarp and attach to both (1931) Posts, 1/2” in from the edge of the

tarp, with 2 (S5) #8 x 1/2” Pan Screws (with #8 at washer). (g. 28.2)

D: Attach a third (S5) #8 x 1/2” Pan Screw (with #8 at washer) to each side, 6-5/8” from the rst two screws, as

shown in g. 28.2.

Hardware Other Parts

Loosen these bolts

Fig. 28.2

1931

Fig. 28.1

6 x #8 x 1/2” Pan Screw (#8 at washer)

3/4”

with #8

at washer

2036

Outside Fort View

1 x Brookridge Tarp

Brookridge Tarp

1-1/2”

1931

6-5/8”