Specifications

Take the following steps to secure your child with the vehicle’s own 3-point

belt:

Pull out the vehicle restraint and place the lap belt under both armrests (D)

of the seat (J) (Fig. 13).

Now close the belt buckle. Check to see whether the belt buckle is properly

locked in place (Fig. 13).

Tighten the lap belt and place the diagonal belt on the side of the belt buck-

le under the armrests (D) (Fig. 14).

Take the diagonal belt and feed it in between the red diagonal belt guide (B)

and the headrest (Fig. 15; Point 1). Now pull the belt to the inside toward the

child's neck (Fig. 15; Point 2).

Please ensure that the diagonal belt guide (B) opposite the belt buckle is

used (Fig. 17).

Make sure that the belt lies in the diagonal belt guide (B) and is not

jammed at the front of the hook (Fig. 16).

The belts may not be twisted and must fit closely against the child’s body.

Make certain that the belt buckle is in the correct position.

Now pull the belt system tight (Fig. 17).

Examine the belts regularly.

8. Opening the diagonal belt guide

To open the diagonal belt guide (B), press it downward (Fig. 18; Point 1) and

then take the belt out to the side (Fig. 18; Point 2).

ENG