Specifications

Now push both k-fix connectors (E) onto the metal brackets (ISOFIX anchor
points) and press firmly against it so that the connectors (E) lock in place
(Fig. 10).
The correct locking will be confirmed by the "green" k-fix lock indicator (O)
(Fig 11).
Test whether the k-fix connectors (E) are closed by jerking on the
seat (J) and check the left and right k-fix connector whether the lock
indicator (O) shows "green"!
As a final installation step you need to slide the child restraint system (A)
toward the backrest of the car seat.
Keep the release button (L) pressed in (Fig. 12; Point 1) while at the same
time pushing the seat (J) toward the backrest (Fig. 12; Point 2).
To secure your child in the seat fixed with k-fix, please proceed as described
in Section 7.
7. Securing the child
Semi-universal: If you want to use the car seat with the k-fix
mounting, make sure it is secured in the vehicle as described in
Section 6!
Universal: If you want to use the child safety car seat without the
k-fix mounting, the k-fix connectors must be retracted into the seat
(J)!
Position your kiddy on the vehicle seat as described in Section 5.1-5.3.
Place the child in the seat and make sure that your kiddy has been adjusted
according to the child's body size (Section 4).
9
ENG