Booster Car Seat Instruction Manual • Certified for use in motor vehicles • Meets or exceeds all aplicable requirements of Federal Motor Vehicle Safety Standard FMVSS 213 Para atención al cliente en Espanol llame al siguiente número 1-855-92-KIDDY o log en www.kiddyusa.com.
(A) booster car seat (B) shoulder belt guides (C) backrest (D) arm rest (E) k-fix connector (F) shock absorber (G) funnels (P) backside (H) headrest (I) shoulder rest (J) seat (K) leg extension (L) release button (M) retraction tab (Q) height adjustment handle (R) manual box (E) k-fix Connector (N) release mechanism (O) green indicator
ENG Table of contents 1. Introduction...................................................................... 3 3. General Safety Warnings............................................. 2. 4. 4.1 4.2 4.3 Recommended use........................................................ 3 4 Choosing a vehicle seating position and preparing to install the booster car seat................. 6 Vehicle seat location requirements...................................... 6 Incompatible vehicle seat belts...................
ENG ‘kiddy cruiserfix pro’ - USA Instruction Manual 1. Introduction We’re delighted that you have chosen the ‘kiddy cruiserfix pro’ as your preferred booster child seat. The ‘kiddy cruiserfix pro’ is the latest innovative product in our child seat line. Our special energy-absorbent design offers the greatest possible safety in the event of frontal or side crash. You can use this booster car seat for children weighing 33 to 100 lbs (15 to 45.3 kg) and up to 60 in.
ENG 3. Genaral Safety Warnings ! WARNING DEATH or SERIOUS INJURY can occur • Failure to follow the instructions and labels can result in serious injury or death from ejection or contacting the vehicle interior. Read and follow the information provided in the instruction manual and product labels before using this booster car seat. • Children 33 to 100 lbs (15.0 to 45.4 kg) must use the booster car seat. • Discontinue use of this booster car seat when child’s weight exceeds 100 lbs (45.
! WARNING ENG DEATH or SERIOUS INJURY can occur • Allow your child to take breaks during longer trips, and be sure that she / he does not step out of the vehicle into traffic unattended. • Always check and understand the vehicle’s operating manual regarding how to use child restraint systems in your vehicle. • The vehicle seat back must be in the upright position as recommended by the vehicle manufacturer and locked in position (in vehicles with fold-down backrests, through-loading facilities etc.).
ENG 4. Choosing a vehicle seating position and preparing to install the booster car seat ! WARNING DEATH or SERIOUS INJURY can occur • Do not use this booster car seat in a front seating location or seat with front, side or seatbelt airbag unless recommended by the vehicle manufacturer in the vehicle owner's manual.
ENG Please familiarize yourself thoroughly with the recommended use of car seats as described in your vehicle’s owners manual. This booster car seat MUST be used only with forward-facing vehicle seats. Do not use this car seat with vehicle seats that face the side or rear of the vehicle. Vehicle seat belts: Many seat belt systems are not safe to use with the booster child seat. The vehicle seat belt must be designed to secure the child tightly at all the times.
ENG Vehicle belts with top or bottom anchor points on the vehicle door (Fig. 4) Fig. 4 Fig. 5 Fig. 6 Lap-shoulder belts that have a separate retractor each for the lap section and shoulder section (Fig. 5) Lap belts forward of the vehicle seat bight (Fig.
ENG Lap belts that have a retractor that locks only in case of a sudden stop (emergency locking retractor or ELR) (Fig. 7) Fig. 7 Fig. 8 Fig. 9 Lap-shoulder belts with seat belt buckle between the lower LATCH anchors when fixed with k-fix (Fig. 8) Lap-shoulder belts with lap belt portion between the lower LATCH anchors when fixed with k-fix (Fig.
ENG Do not install this booster car seat in a vehicle seating position using the k-fix connectors if: The seat belt is located between the lower LATCH anchors. The seat belt buckle is located between the lower LATCH anchors. An appropriate vehicle three point seat belt will have: 1. The shoulder belt upper retractor rigidly fixed to the vehicle frame or vehicle seat (Fig. 10) and 2. The lap belt rigidly fixed to the vehicle frame or vehicle seat (Fig. 10). Fig.
ENG 4.3 Kiddy k-fix system The kiddy k-fix system provides additional security by using the lower anchors of the vehicle LATCH (Lower Anchors and Tether for CHildren) system. The booster car seat does not use the top tether attachment. Kiddy recommends using the k-fix system if possible. Lower anchors can be found in most vehicles 2003 model year and newer. Lower anchors may be indicated on the vehicle seat by icons.
ENG Fig. 13 1.To adjust the headrest height rotate the handle out gently and raise or lower the headrest to position the narrow area of the headrest in line with the child's ears. 2.Release the headrest height adjustment handle to lock headrest in position. 3.Check that the headrest is securely locked, by gently pushing down on headrest. 4.Note that the shoulder rests change position automatically as the headrest is adjusted to best fit your child. 5.
! WARNING ENG DEATH or SERIOUS INJURY can occur • Use only the vehicle’s lap and shoulder belt (or 3-point) system when restraining the child in this booster car seat. • NEVER use only the k-fix connectors to secure your child in the vehicle. The vehicle’s three point seatbelt system must be used to secure your child. • Some vehicle seating positions will have lower LATCH anchors that will not align with the booster car seat k-fix connectors.
ENG Fig. 16 Fig. 17 2. Place the booster car seat on the vehicle seat. To extend the k-fix connectors, press the release button in the front under the leg extension (Fig. 16). The k-fix connectors will automatically extend from the back of the booster car seat. 3. Test to confirm the connector hooks are opened by pushing the release mechanisms forward (Fig. 17). The green indicators will not be showing when the hooks are open and ready for installation. 4.
ENG 6.2 Securing your child: ! WARNING DEATH or SERIOUS INJURY can occur • Use only the vehicle's three point lap and shoulder belt system when restraining the child in this booster car seat. • Do not allow child to slouch or slide down under lap belt. • Do not place shoulder belt under arm or behind back. • Do not use only a lap belt. • Discontinue use of this booster car seat if top of child's ears are above top of seat back. 1.
ENG 6. Slide the upper shoulder belt into the shoulder belt guide on the booster car seat’s headrest on the side opposite vehicle buckle (Fig. 22). Fig. 22 Fig. 23 7. The shoulder belt is properly positioned when it is not jammed against the front of the shoulder belt guide hook (Fig. 23). 8. Pull the shoulder belt towards the vehicle seatbelt retractor removing all slack from both lap and shoulder belts (Fig. 24). Fig.
ENG - Shoulder belt snugly adjusted, contacting chest, belt guide at or above shoulder, and centered on shoulder. - Child must be sitting upright in booster car seat. - Vehicle belts must be properly routed under arm rests and through shoulder belt guide. - Periodically monitor the vehicle belts. Check that they are not twisted and that the vehicle buckle is correctly secured. 6.3 Removing your child: 1. Unbuckle the vehicle seat belt. 2. Open the shoulder belt guide.
ENG 2. Open both left and right k-fix connectors (E) by pressing the release mechanisms (N) towards the front (past the green lock indicator (O)) (Fig. 27). 3. When the connectors are open, the booster car seat is detached from the lower anchors. Fig. 27 4. Finally, the k-fix connectors (E) must be retracted into the seat (J). Hold the release button (L) (Fig. 28; Step 1) while pulling the retraction tab (M) until the connectors are completely inside the seat (Fig. 28; Step 2). 5.
9.1 Removing the headrest cover ENG The headrest and backrest cover are sewn together as a single unit. Slide the adjustable headrest (F) up to the highest position. Free the cover around the height adjustment handle (Q) at the back of the headrest (H) and below both shoulder belt guides (B). Gently pull the cover off the headrest (H) from the back towards the front. 9.2 Removing the shoulder rest cover Slide the adjustable headrest (H) down to the lowest position.
- Do not use bleach, drip dry. ENG - Do not spin or place in a tumble dryer. - The covers are an essential component of the safety design. Therefore, you should only use original covers from kiddy USA. If you require replacement covers, you can order them from kiddy USA. Fabric care: All of our fabric meets the highest standards regarding colorfastness against UV radiation. Nevertheless, all fabric fades when exposed to UV radiation.
ENG PLEASE COMPLETE AND MAIL THE OWNER REGISTRATION CARD WITHIN (30) DAYS OF PURCHASE OR REGISTER ONLINE http://kiddyusa.com/registration_carseat.html LIMITATION OF DAMAGES The warranty and remedies as set forth above are exclusive and in lieu of all others, oral or written express or implied. In no event will kiddy USA Inc. or the retailer selling this product be liable to you for any damages, including incidental or consequential damages, arising from the use this product.
ENG Although child restraint systems undergo testing and evaluation, it is possible that a child restraint could be recalled. In case of a recall, we can reach you only if we have your name and address, so please fill in the registration form provided or register online to be on our recall list. Register online at http://kiddyusa.com/registration_carseat.html In order to properly register your child restraint system, you will need to provide the model number, serial number and date of manufacture.
kiddy USA, Inc. 685 Dividend Dr. Peachtree City, GA 30269 Phone: 1-855-92-KIDDY E-mail: info@kiddyusa.
