Operation Manual

9. Dismantling the k-fix after semi-universal use

Keep the release button (L) pressed in (Fig. 19; Point 1) while at the same

time pushing the seat (J) away from the backrest (Fig. 19; Point 2).

Open the left and right k-fix connectors (E) by pressing the release mecha-

nisms (N) towards the front (past the "green" lock indicator (O)) (Fig. 20).

When the connectors (E) are open, the kiddy cruiserfix is decoupled from the

body of the car.

Finally the k-fix connectors (E) must be retracted into the seat (J).

Keep the release button (L) pressed in (Fig. 21; Point 1) while pulling on the

retraction tab (M) (Fig. 21; Point 2) until the connectors (E) are completely

inside the seat (J).

Now let go of the release button (L) and then the retraction tab (M).

10. Removing and replacing the cover

Never use your kiddy child safety seat without its original cover. The cover

forms part of the safety concept.

10.1 Removing the headrest and backrest cover

The headrest and backrest cover are sewn together as a single unit.

Slide the adjustable headrest (F) up to the highest position.

ENG