Brochure

ManualsBrandsKidde ManualsCarbon Monoxide AlarmKN-COPP-B-LP

Description

The Kidde 900-0146-LP Carbon Monoxide Alarm

includes a digital display feature. This key feature adds

an advanced level of protection that you have come to

expect in a Kidde manufactured product. This easy to

install alarm has been carefully designed and tested to

detect CO concentration in a residential environment.

This easy-to-install alarm is suitable for all living areas and

has a 7-year life and a 5-year limited warranty.

Consumer Benefits

The Kidde 900-0146-LP battery operated CO alarm

provides continuous monitoring of CO levels, even dur-

ing power outages when many CO incidents occur. The

digital display feature allows for easy viewing of carbon

monoxide levels from 30-999 PPM (parts per million).

The 900-0146 will also detect and store concentration

CO levels as low as 11 and up to 999 PPM with its peak

level memory display. This alarm includes a slide-out bat-

tery door that gives immediate access to the batteries

and a safety feature that makes it difficult to close the

cover without the batteries being installed. It has a 7-year

life and a 5-year limited warranty.

Features and Benefits

• BatteryOperated – Provides best protection during

power outages.

• DigitalDisplay – Shows CO level in PPM (parts per

million). Updates digital reading every 15 seconds allowing

you to see if levels change.

• PeakLevelMemory – Displays the highest CO

concentration measured since the last reset.

• Test/ResetButton – Tests CO alarm circuit operation

and allows you to immediately silence the alarm.

• LowBatterySignal – Alerts user when the batteries

need to be replaced.

• Slide-OutBatteryDoorCover – Gives immediate

access to batteries

• BatterySafeguard – Makes it difficult to close the

cover without batteries in the unit.

DigitalDisplay

Displays the level of carbon monoxide the

unit is sensing. The unit updates this reading

every 15 seconds.

Test/ResetButton

Tests unit’s electronic circuitry & horn and resets

the unit during alarm.

LED’s

Green LED for normal operation, Red LED for alarm.

PeakLevelMemory

Displays the highest CO concentration measured

since the last reset.

SIGNALING

LISTED

Battery Operated with Digital Display

Carbon Monoxide Alarm

PartNumber900-0146-LP  ModelKN-COPP-B-LPM

Alert user to replace after

7 years of operation

All Kidde

CO Alarms

Summary of content (2 pages)

PAGE 1
Battery Operated with Digital Display Carbon Monoxide Alarm Part Number 900-0146-LP Model KN-COPP-B-LPM Digital Display Displays the level of carbon monoxide the unit is sensing. The unit updates this reading every 15 seconds. Test/Reset Button Tests unit’s electronic circuitry & horn and resets the unit during alarm. LED’s Green LED for normal operation, Red LED for alarm. Peak Level Memory Displays the highest CO concentration measured since the last reset.
PAGE 2
Carbon Monoxide Alarm Battery Operated with Digital Display Part Number 900-0146-LP Model KN-COPP-B-LPM Architectural and Engineering Specifications The alarm shall include a piezoelectric horn that is rated at 85 decibels at 10 feet. When the unit detects carbon monoxide, the alarm pattern will be four (4) short beeps – followed by five (5) seconds of silence – followed by four (4) short beeps with a corresponding red LED flash. It shall also include a 5-year manufacturer’s limited warranty.