Use and Care Manual

4. Installation Instructions
Mounting
• After selecting the proper location for
your CO alarm and wiring the AC Quick-
Connector harness, plug the AC Quick-
Connector into the mating connector in
the back of the alarm. Be sure the con-
nectors snap together securely.
• Push the excess wire back into the elec-
trical box.
• Install the alarm in the electrical box
using the four screws provided.
• Turn on the AC power. The green AC
Power On Indicator should be lit when
the alarm is operating from AC power.
• The rechargeable battery is turned on
automatically when AC power is sup-
plied.
NOTE: LOW BATTERY WARNING IS DISABLED FOR 24 HOURS
AFTER ALARM IS FIRST POWERED ON TO ALLOW THE BATTERY
TIME TO CHARGE.
Important Labels Provided
Two labels have been provided that have important information on what
to do in case of an alarm. Add the phone number of your emergency
service provider in the space provided. Place one label next to the alarm
after it is mounted, and one label near a fresh air source such as a door
or window.
2527-7201-00(820-1387A):_ 2008.5.12 9:35 AM Page 14