Owner's Manual

SMOKE ALARM DESCRIPTION

Model 755 Ionisation 240V~ Smoke Alarm with

9VDC non-rechargeable alkaline

battery backup.

Model 755RL Ionisation 240V~ Smoke Alarm with

12VDC rechargeable lithium

battery backup.

Thank you for purchasing a quality Clipsal Lifesaver

755 Series

Smoke Alarm. The 755 Series are mains powered smoke alarms,

with a battery backup that will operate in the event of a mains

power failure. The alarm will sound when smoke produced at the

start of a fire enters the unit’s detection chamber. These units

are not designed to detect heat or flame. A five-year warranty

(excluding batteries) is included.

Please read the following instructions carefully to ensure correct

installation and maintenance.

Installation of the Clipsal Lifesaver

755 Series Smoke Alarm

must be carried out by a licensed electrician or similarly qualified

person to SAA Wiring Rules (AS3000) and relevant Building

Codes.

All ionisation Smoke Alarms use an extremely small amount of a

radioactive element in their ionisation chambers. Accordingly,

this product contains 37 kBq of Americium 241, a radioactive

material, and is manufactured in compliance with U.S. NRC

safety criteria in 10CFR 32.27. The purchaser is exempt from

any regulatory requirements (U.S. License No. 12-15537-02E).

Do not attempt to remove or tamper with this radioactive

source. Never try to repair or dispose of the unit yourself. Return

it to the supplier for repairs or safe disposal. It is illegal to send

products containing radioactivity through Australia Post. Check

for similar conditions with any other forwarding agency before

sending this product to the supplier.

SMOKE ALARMS HAVE LIMITATIONS

The Clipsal Lifesaver

Series Smoke Alarm is not fool-proof and

is not warranted to protect lives or property from fire. Smoke

Alarms are not a substitute for insurance. In addition, it is possi-

ble for the Smoke Alarm to fail at any time.

FOR THIS REASON YOU MUST TEST THE SMOKE ALARM

WEEKLY AND REPLACE EVERY TEN YEARS.