Owner's Manual

• The green light indicates that the unit is operating with a.c.

power. If this light is off, the a.c. power is off and the backup

battery will operate the unit.

• You will not be safeguarded if the a.c. power goes off and the

unit is not fitted with a fresh battery.

• The red light should flash once approximately every 60 sec-

onds to indicate the unit is functioning and alert. It will flash

rapidly when the unit goes into alarm. The flashing light and

pulsating loud alarm will continue until the air is cleared. For

interconnected alarms, only the unit which senses smoke (or

is being tested) will flash rapidly. All other units will sound

their alarms but not flash.

• Do not apply excessive force to FALSE ALARM/TEST button.

Doing so may damage the unit and void the warranty.

• Never use an open flame of any type to test the alarm. You

may damage the alarm or set fire to your home. Operating the

FALSE ALARM/TEST button will check for correct functioning.

LED INDICATORS

Model 755 features one combined LED indicator. The following

section explains what condition the LED indicator is describing:

• Constant GREEN on – AC power is present.

• GREEN is off – AC power is NOT present.

• RED blinks once a minute – indicates presence of working

battery.

• RED blinks once a second – smoke alarm senses smoke and

simultaneously sounds an audible alarm.

• RED blinks once every 10 seconds – smoke alarm is quieting

an unwanted alarm.

• RED is off (interconnected systems only) – another smoke alarm

in the network has sensed smoke and is signaling this alarm.

• RED light blinks 3 times every minute (Item 755 only) – indicates

this alarm initiated an alarm in an interconnected system. (Press

the TEST button to reset.)

• RED light blinks 4 times every minute preceded by an audible

chirp – indicates a weak or improperly installed battery.