Installation Guide

2. Other Alarm Visual And Audible Indicators

Operational Mode Visual Indications Audible Indications Action/Note

Normal (standby) Green LED blinks approx every

60 sec.

Test (button press when

no alarm condition is

present)

(Note: Test is very loud,

stand a few feet away.)

Red LED blinks in time with

alarm pattern.

• Single beep.

• 3 long beeps, voice “Fire!,”

3 long beeps

Perform button press once a week

to verify proper alarm operation.

Smoke Alarm Memory

(unit has experienced a

smoke event.)

Red LED blinks

every 15 sec.

After button push, voice “Smoke

previously detected.”

NOTE: Alarm memory is only

retained for 24 hrs. Push button to

clear Alarm Memory.

Smoke Alarm Hush

Mode

Red LED blinks every 2 sec. After button push, voice “Hush

Mode Activated.” Smoke alarm

pattern stops. If there is too much

smoke to allow Hush

, voice

“Too much smoke, alarm cannot

be hushed.” (smoke alarm pattern

continues)

This feature is to be used only

when a known alarm condition,

such as smoke from cooking,

activates the alarm. Push button

during Hush

to clear Hush

and

perform a test.