Use and Care Manual

Battery Powered Smoke & Carbon Monoxide Alarm
Model 900-CUDR
2-in-1 Detection
Alerts you to both smoke & carbon monoxide (CO) using a single unit.
Easy-Install Mounting Bracket
Included for simple, quick installation in 4 orientations.
Self-Testing
Smoke & CO alarm is equipped with components that are always
checking to ensure the device is operating as expected.*
Photoelectric Smoke Sensor
May detect visible fire particles associated with slow smoldering fires
sooner than an ionization sensor.
*Self-testing is not a substitute for a manual push test of the alarm. Perform a button test once per week to verify proper alarm operation.
Description
The Battery Powered Smoke & Carbon Monoxide Alarm (2-AA batteries
included), is equipped with self-testing components that are always checking
to make sure the alarm is on and working.* This smoke and CO combo alarm
helps protect you and your family from 2 dangerous threats – fire and carbon
monoxide – in one unit. What’s more, the included mounting bracket makes
installation quick and easy. Battery-powered smoke alarms provide reliable
detection even during power outages, for extra peace of mind.
Leading authorities recommend that both ionization and photoelectric
smoke alarms be installed to help ensure optimal detection of the various
types of fires that can occur within the home. Ionization sensing alarms may
detect invisible fire particles (associated with fast flaming fires) sooner than
photoelectric alarms. Photoelectric sensing alarms may detect visible fire
particles (associated with slow smoldering fires) sooner than ionization alarms.
Alarm Warnings – featuring multi-color LEDs
Fire: The red LED will flash in sync with the alarm pattern (3 long beeps).
The alarm will repeat this pattern until the unit is reset or smoke is eliminated.
Carbon Monoxide: The red LED will flash in sync with the alarm pattern (4
quick beeps). This continues until the smoke & carbon monoxide alarm is
reset or the CO is eliminated.
Low Battery: One chirp and amber LED flash per minute.
Alarm Memory: Alerts a user if smoke or CO has been detected in the last 24
hours. If smoke has been detected, the red LED blinks every 15 sec. If CO has
been detected, the red LED blinks twice every 15 sec.
Features & Benefits
• 2-in-1 Detection - Alerts you to both smoke & carbon monoxide (CO)
using a single unit.
• Easy-Install Mounting Bracket - (Included) for simple, quick installation
in 4 orientations.
• Self-Testing - Smoke & CO alarm is equipped with components that are
always checking to ensure the device is operating as expected.*
• Photoelectric Smoke Sensor - May detect visible fire particles
associated with slow smoldering fires sooner than an ionization sensor.
• Electrochemical CO Sensor - Accurate and reliable CO detection during
the unit’s life, remains stable during temperature and humidity changes
and resists reactions to household gases that may cause false readings
or reduce sensitivity.
• One-Touch Button - performs the following functions:
– Activates the Hush
TM
feature to temporarily silence nuisance alarms.
– Tests the unit’s electronics and verifies proper operation.
– Silences a low battery chirp for up to 24 hours at a time for a
maximum of 7 days.
– Silences the end of life chirps for 24 hours at a time for a
maximum of 7 days.
– Resets the device during a CO alarm (Unit will re-enter alarm within
6 minutes of reset if 70 ppm or more of CO is present).
ALERTS USER TO REPLACE ALARM AFTER 10 YEARS OF OPERATION
Images are representative only.
Actual product may vary slightly.