Installation Guide

5

Operational Mode Visual Indications Audible Indications Action/Note
Normal (standby) Red LED blinks
approx every 60 sec.
Test (button press
when no alarm
condition is
present)
(Note: Test is very
loud, stand a few
feet away.)
Red LED blinks in
time with alarm
pattern.
• Single beep.
• 3 long beeps, pause,
3 long beeps.
• Single beep.
Perform button press
once a week to verify
proper alarm operation.
Smoke Alarm
Memory (unit
has experienced
a smoke alarm
event)
Red LED blinks
every 15 sec.
NOTE: Alarm memory is
only retained for 24 hrs.
Push test button to clear
Alarm Memory.
Smoke Alarm
Hush
TM
Mode
Red LED blinks
every 2 sec.
Smoke alarm pattern
stops.
(If there is too much
smoke to allow
Hush
TM
: Smoke alarm
pattern continues.)
This feature is to be
used only when a known
alarm condition, such
as smoke from cooking,
activates the alarm.
Push button again to
cancel Hush
TM
.

