Use and Care Manual

19
10. Kidde App Features and Instructions
For best Wi-Fi enrollment results, follow these steps:
1. Scan QR code shown in STEP 1 on the front of the Quick Start Guide. Install the Kidde app.
2. Open the Kidde app. Create and login to your account. Tap “Add a device.” Select “SMART Smoke +
Carbon Monoxide Alarm.” Follow in-app steps.
3. Scan your unique QR code, shown in STEP 3 of the Quick Start Guide, or on back of your alarm. Setup and
connect alarm to the app. This will include the wiring and installation steps shown in sections 9, 10, and 11.
4. Complete setup by following in-app steps.
Your Kidde app is user friendly and allows helpful features such as:
• Get alarm notifications if smoke or carbon monoxide is detected in your home.
• Receive notifications when a device needs to be replaced.
• Simple setup – easily add alarms by scanning the QR code on the back of the product.
• Option to notify friends and family if smoke or carbon monoxide is detected when you are not home.
• Easily test your alarm to check that it’s on and working when you are home (on the same Wi-Fi network). *
• Hush
®
false alarms when you are home (on the same Wi-Fi network). *
* This feature only applies to the P4010ACSCO-WF SMART Smoke + Carbon Monoxide Alarm.