Specification

Smoke + Carbon Monoxide Alarm with smart features
Model P4010ACSCO-WF
Distributed by:
1016 Corporate Park Drive,
Mebane NC 27302
1-877-542-5471 | www.Kidde.com
A Carrier Company
©2022 Carrier. All Rights Reserved.
All trademarks and service marks
referred herein are property of their
respective owners.
PDS-KL-P4010ACSCO-WF-0422 | #12700
AC/DC Hardwire Specifications
Installation Fits most standard electrical box openings
Electrical Connection Plug-in connector
Interconnect
Up to 24 Kidde devices
(limited by NFPA 72, see user guide)*
Sounds and Warnings
Smoke Alarm 3 long beeps, voice “Fire,” 3 long beeps
CO Alarm
4 fast beeps, voice “Warning Carbon
Monoxide,” 4 fast beeps
End of Unit Life
After 10 years of operation, chirps
and voice “Replace alarm, press button
to temporarily silence”
CO Alarm
Response Times
70ppm: 60-240min
150ppm: 10-50min
400ppm: 4 -15min
Technical Specifications
Power Source
120VAC 60Hz, 53mA max
3V sealed lithium battery backup
Sensor(s)
Smoke: Photoelectric
CO: Electrochemical
Audio Alarm 85dB at 10ft
Temperature Range 40˚F (4.4˚C) to 100˚F (37.8˚C)
Humidity Range
10 to 95% relative humidity (RH),
non-condensing
Wi-Fi
802.11b/g/n (2.4GHz) Wi-Fi (Wi-Fi features
only work with AC power connected)
Weight 0.60lb
Regulatory
Agency Compliance
(at date of
manufacture)
UL 217
UL 2034
NFPA 72
NFPA 101 (One and two family dwellings)
Federal Housing Authority (FHA)
Housing and Urban Development (HUD)
Important Information
Industry experts recommend specific locations for smoke alarms, such
as every level and sleeping area of the dwelling. Industry experts also
recommend a CO alarm be installed on each level of the home—ideally
on any level with fuel burning appliances and outside of sleeping
areas. See user guide for more location information.
Leading authorities recommend that both ionization and photoelectric
smoke alarms be installed to help ensure optimal detection of the
various types of fires that can occur within the home. Ionization
sensing alarms may detect invisible fire particles (associated with
fast flaming fires) sooner than photoelectric alarms. Photoelectric
sensing alarms may detect visible fire particles (associated with slow
smoldering fires) sooner than ionization alarms.
WARNING: This product is intended for use in indoor residential
locations. It is not designed to measure compliance with Occupational
Safety and Health Administration (OSHA) commercial or industrial
standards. This device is designed to protect individuals from acute
effects of Carbon Monoxide exposure. It will not fully safeguard
individuals with specific medical conditions. If in doubt, consult a
medical practitioner. Individuals with medical problems may consider
using warning devices which provide audible and visual signals for
carbon monoxide concentrations under 30 ppm.
Installation
FUSE OR CIRCUIT BREAKER
BLACK
WHITE
RED
L
N
First
Alarm
Additional
Alarms
Architectual and Engineering Specs
See User Guide for complete instructions.
(Not for sale by individual unit)
Ordering Information
UPC Ordering No: I 2 of 5 Packaging Master Pack Qty Dimensions (w” x d” x h”) Weight
047871310425 21031042 10047871310422
Box 2 8.9” x 7.7” x 7.9” 4 lbs
* This alarm is not designed to be interconnected with other manufacturer’s
products, unless otherwise specified.
5.04”
2.36”