Kidde Smoke + Carbon Monoxide Alarm with Indoor Air Quality Monitor User Guide Combination Photoelectric Smoke & Carbon Monoxide Alarm with Voice, Hardwire Interconnect, Indoor Air Quality Monitoring (IAQ), and Wi-Fi Compatibility Model P4010ACSCOAQ-WF Wi-Fi COMPATIBILITY: This model requires a home Wi-Fi router and internet to connect to a mobile device. ( Requires 802.11b/g/n (2.4GHz) Wi-Fi ) NOTE: Wi-Fi features do not function without AC power.
Thank You for Purchasing this Wi-Fi Alarm Hardwired for 120VAC, this model features a non-replaceable, sealed-in battery backup. It also contains a voice message system and SMART HUSH® Control to temporarily silence nuisance alarms. It is capable of hardwire interconnect, and is Wi-Fi compatible with mobile devices. For best Wi-Fi enrollment results, follow these steps: 1. Scan QR code shown in STEP 1 on the front of the Quick Start Guide. Install the Kidde app. 2. Open the Kidde app.
Contents 1. Smoke Alarm: What To Do When The Alarm Sounds . . . . . . . . 4 2. Carbon Monoxide Alarm: What To Do When The Alarm Sounds . . . . 5 3. Other Alarm Visual And Audible Indicators . . . . . . . . . . 4. Troubleshooting Guide . . . . . . . . . 5. Introduction, Product Features & Specifications . . . . . . . . . . . . . 6 . . . 7 . 8 6. Limitations Of Smoke And Carbon Monoxide Alarms . . . . . . .
1. Smoke Alarm: What To Do When the Alarm Sounds The smoke alarm pattern is three long beeps with voice “Fire!,” a 1.5 second pause, and three long beeps repeating. The red LED blinks in time with the alarm pattern. The smoke alarm takes precedence when both smoke and carbon monoxide are present. •• Alert small children in the home as well as anyone else that might have difficulty recognizing the importance of the alarm sounding or that might have difficulty leaving the area without help.
2. Carbon Monoxide Alarm: What To Do When the Alarm Sounds The carbon monoxide (CO) alarm pattern is four quick beeps with voice “Warning! Carbon Monoxide” repeating every 5 seconds. The red LED blinks in time with the alarm pattern. On DC power only, after 4 mins, the alarm pattern and voice will only occur every 60 sec. warning: Carbon monoxide alarm activation indicates the presence of Carbon Monoxide (CO) at high concentrations which can kill you. 1) Operate the Test/Hush button.
3. Other Alarm Visual and Audible Indicators 6 Operational Mode Visual Indications Normal (standby) AC power: Green LED on continuously during light conditions, or blink every 60 sec during dark conditions. DC power: Green LED blink approx every 60 sec. Audible Indications Action/Note: Test (button press when no alarm condition is present, and the device is online and connected to Wi-Fi, or if the device was never connected to Wi-Fi, or if the device was reset and removed from a Wi-Fi network.
4. Troubleshooting Guide If you are experiencing a problem with your alarm, or a fault, and are unsure of the next action, please contact product support at 1-877-542-5471 before discharging the battery. You may also write us at: Kidde, 1016 Corporate Park Drive, Mebane, NC 27302, or visit our internet address at www.kidde.com.
5. Introduction, Product Features and Specifications Introduction This alarm detects products of combustion using photoelectric technology and carbon monoxide using an electrochemical cell. The device also monitors the indoor air quality of the residence. Many times throughout this User Guide, we will refer to Carbon Monoxide as “CO.” Ten (10) years after the unit was activated, this unit will automatically alert you that it is time to replace the unit. This is called “End of Unit Life” mode.
6. Limitations of Smoke and Carbon Monoxide Alarms Warning: please read carefully and thoroughly •• Life safety from fire in residential occupancies is based primarily on early notification to occupants of the need to escape, followed by the appropriate egress actions by those occupants. •• Fire warning systems for dwelling units are capable of protecting about half of the occupants in potentially fatal fires.
Warning: Please read carefully and thoroughly •• IMPORTANT: This alarm is designed to detect carbon monoxide gas from ANY source of combustion. It is NOT designed to detect any other gas. CAUTION: This alarm will only indicate the presence of carbon monoxide gas at the sensor. Carbon monoxide gas may be present in other areas. Never restart the source of a CO problem until it has been fixed.
7. Recommended Locations For Smoke And Carbon Monoxide Alarms •• Locate smoke alarms in all sleeping areas. Try to monitor the exit path as the bedrooms are usually farthest from the exit. If more than one sleeping area exists, locate additional alarms in each sleeping area. •• Locate additional alarms in stairways, because stairways act like chimneys for smoke and heat. •• Locate at least one alarm on every floor level. •• Locate an alarm in every bedroom.
Note: measurements shown are to the closest edge of the alarm. NFPA 72 states: “Smoke alarms in rooms with ceiling slopes greater than 1 ft in 8 ft (0.3m in 2.4 m) horizontally shall be located on the high side of the room.” NFPA 72 states: “A row of detectors shall be ot within 6 feet of appliances spaced and located within 3 ft (0.9m) of the peak of the ceiling measured horizontally.
•• For mobile home installation, select locations carefully to avoid thermal barriers that may form at the ceiling. For more details, see MOBILE HOME INSTALLATION section. •• When mounting the alarm on the wall, use an inside wall with the top edge of the alarm at a maximum of 12” (30.5 cm) below the ceiling. •• Put smoke alarms at both ends of a bedroom hallway or large room if the hallway or room is more than 30 feet (9.1 m) long.
8. Locations to Avoid (See Figures 7-A, 7-B, & 7-C for recommended locations) •• In the garage. Products of combustion are present when you start your automobile. •• Normal cooking may cause nuisance alarms. If a kitchen alarm is desired, it should have an alarm silence feature or be a photoelectric type. •• Do not install within 6 ft. of heating or cooking appliances. •• Less than 4” (10cm) from the peak of an “A” frame type ceiling.
9. Wiring Instructions and Mounting Bracket Installation For best Wi-Fi enrollment results, follow these steps: 1. Scan QR code shown in STEP 1 on the front of the Quick Start Guide. Install the Kidde app. 2. Open the Kidde app. Create and login to your account. Tap “Add a device.” Select “ Smoke + Carbon Monoxide Alarm with Indoor Air Quality Monitor.” Follow in-app steps. 3. Scan your unique QR code, shown in STEP 3 of the Quick Start Guide, or on back of your alarm. Setup and connect alarm to the app.
•• A maximum of 24 Kidde Safety devices may be interconnected in a multiple station arrangement. The interconnect system should not exceed the NFPA interconnect limit of 12 smoke alarms and/or 18 alarms total (smoke, CO, Smoke/ CO Combination, heat, etc.). With 18 alarms interconnected, it is still possible to interconnect up to a total of 6 remote signaling devices and / or relay modules. •• The maximum wire run distance between the first and last unit in an interconnected system is 1000 feet.
NOTE: AC power should be turned off at this stage. •• After selecting the proper location for your Alarm, and wiring the AC QUICK CONNECT harness as described in the WIRING INSTRUCTIONS, attach the mounting bracket to the electrical box. To ensure aesthetic alignment of the alarm with the hall- A When mounting in a hallway, the "A" line should be parallel with the hallway. When wall mounting, the "A" line should be horizontal.
NOTE: Attaching AC power first, without rotating the alarm onto the mounting bracket, will result in a false low battery trouble condition chirp (see Troubleshooting Guide). You need to activate the battery to eliminate the low battery trouble condition chirps. Attach unit to mounting bracket very soon after applying AC power to avoid false low battery notification. NOTE: The battery activation is a one-time feature.
10. Kidde App Features and Instructions For best Wi-Fi enrollment results, follow these steps: 1. Scan QR code shown in STEP 1 on the front of the Quick Start Guide. Install the Kidde app. 2. Open the Kidde app. Create and login to your account. Tap “Add a device.” Select “Smoke + Carbon Monoxide Alarm with Indoor Air Quality Monitor.” Follow in-app steps. 3. Scan your unique QR code, shown in STEP 3 of the Quick Start Guide, or on back of your alarm. Setup and connect alarm to the app.
11. Installation, Activation, and Wi-Fi Enrollment For best Wi-Fi enrollment results, follow these steps: 1. Scan QR code shown in STEP 1 on the front of the Quick Start Guide. Install the Kidde app. 2. Open the Kidde app. Create and login to your account. Tap “Add a device.” Select “Smoke + Carbon Monoxide Alarm with Indoor Air Quality Monitor.” Follow in-app steps. 3. Scan your unique QR code, shown in STEP 3 of the Quick Start Guide, or on back of your alarm. Setup and connect alarm to the app.
B. Open the Kidde App and follow instructions on the App to finish Wi-Fi enrollment. NOTE: If no further steps are taken within 15 minutes of initial power up, a voice prompt, “Not Connected” will be heard once, and the Wi-Fi function will turn off. The unit will then perform as a standard hardwired alarm. See Section 11.3 for reactivating Wi-Fi features. C. After the Wi-Fi enrollment is completed, the alarm will announce “Success, now connected.” D.
11.3 Resetting a Device’s Wireless Settings If you encounter an issue at any point during the Wi-Fi enrollment process, you may reset the device by following the directions below. “Resetting wireless settings.” A. Begin reset •• Press and hold the button on the device for 8-9 seconds until you hear 3 beeps. Release button. You will hear the words “Resetting wireless settings.” b. Conclude reset Hold for 8-9 seconds Figure 11.3-A Light ring will flash green once and then it will pulse red.
12. Operation and Testing Operation The alarm is operating once it is activated and testing is complete. When products of combustion (smoke or CO) are sensed, the unit sounds a loud alarm with voice messages. (See Sections 1 and 2 for alarm signal descriptions). In high levels of CO, the unit will go into alarm in a shorter period of time than at low levels of CO. CO alarm sensor response times At 70 PPM, the unit must alarm within 60-240 minutes. At 150 PPM, the unit must alarm within 10-50 minutes.
erratic or low volume sound, the unit must be replaced. See Permanently Disable Alarm / Discharge Battery section to determine how to prepare the unit for shipment or disposal. NOTE: If you push the test button on your alarm, the app will send you a text message. However, if you conduct a remote test using the app, you will not receive a text message. Warning: Due to the loudness of the alarm, always stand about 2.5 feet away from the unit or use ear protection when testing.
close to a cooking appliance. Large quantities of combustible particles are generated from spills or when broiling. Using the fan on a range hood which vents to the outside (non-recirculating type) will also help prevent nuisance alarms from occurring by removing these combustible products from the kitchen. Carbon Monoxide (CO) Nuisance RESET: Pushing the button during CO alarm allows the unit to reset calculations and double check for the presence of CO.
15. Permanently Disable Alarm / Discharge Battery WARNING: Failure to DISCHARGE alarm battery as instructed prior to disposal may create potential for lithium battery related fire or hazard. WARNING: Discharging the alarm battery is permanent. •• Once the alarm battery has been discharged, it cannot be reactivated! •• Once discharged, the alarm will NO LONGER DETECT SMOKE OR CO OR INDOOR AIR QUALITY. •• Once the alarm battery is discharged, the battery is depleted and the alarm will no longer function.
16. General Carbon Monoxide (CO) Information Carbon monoxide (CO) is a colorless, odorless, and tasteless poison gas that can be fatal when inhaled. CO inhibits the blood’s capacity to carry oxygen. Possible Sources of CO Inside your home, appliances used for heating and cooking are the most likely sources of CO. Vehicles running in attached garages can also produce dangerous levels of CO. CO can be produced when burning any fossil fuel: gasoline, diesel, propane, natural gas, oil and wood.
CO Safety Tips Every year, have the heating system, vents, chimney and flue inspected and cleaned by a qualified technician. Always install appliances according to manufacturer’s instructions and adhere to local building codes. Most appliances should be installed by professionals and inspected after installation. Regularly examine vents and chimneys for improper connections, visible rust, or stains, and check for cracks in furnace heat exchangers.
17. Cleaning Your Alarm Your Alarm Should be Cleaned at Least Once a Year You can clean the interior of your alarm (sensing chamber) by using compressed air or a vacuum cleaner hose and blowing or vacuuming through the openings around the perimeter of the alarm. The outside of the alarm can be wiped with a damp cloth. Use only water to dampen the cloth, use of detergents or cleaners could damage the alarm.
18. Good Safety Habits Develop and Practice a Plan of Escape Prepare and practice a home escape plan twice a year, including drills at night. Know two ways out of every room (door & window) and identify a meeting place outside the home where everyone will gather once they have exited the residence. When two people have reached the meeting place, one should leave to call 911 while the second person stays to account for additional family members.
Smoke Detection – Are More Alarms Desirable? The required number of smoke alarms might not provide reliable early warning protection for those areas separated by a door from the areas protected by the required smoke alarms.
FCC (Contains FCC ID: 2AC7Z-ESPWROOM32UE) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
19. Service and Warranty Ten-Year Limited Warranty Kidde warrants that the enclosed alarm will be free from defects in material and workmanship or design under normal use and service for a period of ten years from the date of purchase.
QUESTIONS OR FOR MORE INFORMATION Call Kidde Product Support line at 1-877-542-5471 or contact us at www.kidde.com Kidde 1016 Corporate Park Drive, Mebane, NC 27302 Kidde’s General Privacy Notice can be found at: https://www.corporate.carrier.com/legal/privacy-notice/ A Carrier Company ©2022 Carrier. All Rights Reserved.
