Installation Guide

4. Installation / Mounting Instructions

CAUTION: THIS UNIT IS SEALED (INCLUDING THE BATTERY). THE

COVER IS NOT REMOVABLE!

Attaching And Activating The Alarm.

1.To obtain aesthetic alignment of the alarm with the hallway or wall, the “A”

line on the mounting bracket should be parallel with the hallway when ceiling

mounting or horizontal when wall mounting.

2.After selecting the proper smoke alarm location as described in Section 2,

attach the mounting bracket to the ceiling as shown in Image 4. For wall

mounting see Image 5. Place the mounting plate on the wall; be sure the “A”

line is horizontal (parallel to the floor). Use the screws and anchors provided to

secure the mounting bracket (use 3/16” drill bit for anchors).

3.This alarm has a battery permanently sealed inside the alarm no battery

installation is necessary.

IMAGE 4

When mounting

in a hallway, the

“A” line should

be parallel with

the hallway.

Alignment Marks

(”A” Line) on

Mounting

Bracket

IMAGE 5

When wall

mounting, the

“A” line should

be horizontal.

IMAGE 6

Remove

Install