Use and Care Manual
5
2. Other Alarm Visual And Audible Indicators
Operational Mode Visual Indications Audible Indications Action/Note
Normal (standby) Green LED blink approx every
60 sec.
Test (button press
when no alarm
condition is present)
(Note: Test is very
loud, stand a few feet
away.)
Red LED blinks in time with
alarm pattern.
• Single beep.
• 3 long beeps, voice
"Fire!", 3 long beeps.
Perform Test/Hush button
press once a week to verify
proper alarm operation.
Smoke Alarm
Memory (unit has
experienced a smoke
alarm event)
Red LED blink every 16 sec. After button push,
voice “Smoke previously
detected" .
NOTE: Alarm memory is only
retained for 24 hrs.
Push test button to clear
Alarm Memory.
Smoke Alarm Hush
Mode (SMART HUSH®
CONTROL)
Red LED blinks every 2 sec. After button push, voice
“Hush Mode Activated."
Smoke alarm pattern
stops.
(If there is too much
smoke to allow Hush: voice
"Too Much Smoke,
cannot be Hushed" Smoke
alarm pattern continues.)
This feature is to be used only
when a known alarm con-
dition, such as smoke from
cooking, activates the alarm.