Product Overview

Features and Benefits
• Integrated Photoelectric Smoke / CO Alarm and LED
Strobe Light – A single unit can be installed, where previously
a separate smoke / CO alarm and strobe light were needed.
It requires only one electrical box, reducing labor costs and
installation time. No relay required.
• Low Profile Bright 177 Candela Strobe Light – Light level
proven effective in warning those with hearing loss. Attractive
low profile design.
• Synchronized Flash Rates – Strobe flashes will automatically
synchronize (flash at the same time) with other interconnected
P4010ACLEDS-2 and/or P4010ACLEDSCO-2 alarms. Note: Will
not synchronize during test mode.
• 120V Interconnect with 10-year Sealed Lithium Battery
Backup – Will interconnect with up to 24 other Kidde devices.
Battery backup provides 10 years of continuous protection. Note:
battery backup will only power the smoke/CO alarm.
• Voice Warning – Announces “Fire!” or “Carbon Monoxide!”
• Ambient Light Sensing – Establishes Day/Night cycle and
delays chirping during the night until the next day cycle begins.
• Multi-function One Button Strobe Dome includes:
Hush® Feature – Temporarily silences nuisance alarms for up to
10 minutes (smoke must be present before Hush
®
is activated).
Test Feature –
Simultaneously tests the
unit’s electronics and
verifies alarm operation.
120V AC 3-in-1
LED Strobe and 10-Year Combo Smoke / CO Alarm
Meets ADA Requirements for the Hearing Impaired
Model P4010ACLEDSCO-2
• Low Profile Bright 177 Candela Strobe Light
• Synchronized Flash Rates
• 10-Year Sealed Battery Backup
(on Smoke and CO alarm)
• Voice Messaging System
• Smart Hush Control
• Stainless Steel Bug Screen
Description
The Kidde P4010ACLEDSCO-2 is an integrated 120V AC wire-in
smoke and carbon monoxide (CO) alarm with 10-year sealed
battery backup and LED strobe light that provides temporal pat-
terns, visual and voice warnings. The model P4010ACLEDSCO-2
is equipped with a 177 candela strobe light, designed to notify
the deaf and hard of hearing. The unique design measures only
2.3” in height, when mounted.
If smoke is detected, the P4010ACLEDSCO-2 will produce
a steady flash warning (once per second) and sound 3 long
beeps, followed by “Fire!”, repeating. During a CO incident
the strobe horn will sound four (4) short beeps, followed by
“Warning! Carbon Monoxide!”, repeating every 5 seconds. The
LED ring will flash red in conjunction with the audible beeps.
In an alarm condition, strobe flashes will synchronize with other
interconnected P4010ACLEDS-2 and/or P4010ACLEDSCO-2
alarms.
The P4010ACLEDSCO-2 is UL Listed and has a 10-year limited
warranty.
This alarm uses photoelectric sensing technology.
Photoelectric sensing alarms may detect visible fire par-
ticles (associated with slow smoldering fires) sooner than
ionization alarms. Ionization alarms may detect invisible
fire particles (associated with fast flaming fires) sooner
than photoelectric alarms. Leading authorities recommend
that both ionization and photoelectric smoke alarms be
installed to help ensure maximum detection of the various
types of fires than can occur within the home.
See user guide for additional important information.