Specification

Worry-Free Bedroom Smoke Alarm
Sealed Lithium Battery Power with Voice Alarm
Model P3010B
Architectural and Engineering
Specifications
The smoke alarm shall be Kidde unit P3010B or approved equal.
It shall be powered by a non-replaceable lithium battery with
10-year life. The lithium battery shall be sealed in the unit to
prevent removal and/or tampering. The unit shall incorporate a
photoelectric sensor. The temperature operating range shall be
between 40ºF and 100ºF (4ºC and 38ºC) and the humidity oper-
ating range shall be 10%-85% non-condensing relative humidity.
The smoke alarm can be installed on the surface of any wall or
ceiling following the UL/Manufacturer’s approved placement
guidelines. The alarm shall incorporate an automatic activation
feature that will activate the unit as soon as it is attached to the
mounting bracket, no other steps are involved.
The alarm shall include a test button that will simulate a fire con-
dition and cause the unit to go into alarm. This sequence tests
the unit’s electronics to ensure proper operation.
The unit shall have two audible methods for warning of smoke
or fire danger: a piezoelectric horn that is rated at 85 decibels at
10 feet and a voice warning. In alarm, the horn will sound in the
repetitive manner – three (3) beeps, a pause, three (3) beeps, a
pause. In between, the unit will announce “Fire! Fire!”. A red
LED will flash in conjunction with the alarm sound.
The unit shall also indicate a low battery warning utilizing each of
the following methods: a brief alarm chirp, the voice announce-
ment of “Low Battery!” and the red LED will flash once every 30
seconds. The red LED will flash every 60 seconds for the first 10
minutes following power on or test, and once every 10 minutes
thereafter. It will also flash every 10 seconds while in Hush mode.
The smoke alarm shall include an End of Life Alert, where ten
years after initial power-up the unit shall chirp two times every
30 seconds to indicate the alarm needs to be replaced. The End
of Life indication can be silenced three days at a time for a maxi-
mum of 30 days. The unit shall have a deactivation switch to dis-
able it and make it safe for disposal.
The unit shall at a minimum meet the requirements of UL217,
NFPA 72 (chapter 11 2002 edition), The State of California Fire
Marshall, NFPA101 (One and two family dwellings), Federal
Housing Authority (FHA), Housing and Urban Development
(HUD). It shall also include a 10-year manufacturer’s limited war-
ranty.
Ordering Information
Technical
Specifications
Model: P3010B
PowerSource: Sealed Lithium Battery
Sensor: Photoelectric
AudioAlarm: 85dB at 10ft
Temperature Range: 40˚F (4.4˚C) to 100˚F (37.8˚C)
HumidityRange: 10%-85% non-condensing
relative humidity (RH)
Size: 5.22” in diameter x 1.6” depth
Weight: 1 lb.
Interconnects: No
Warranty: 10 year limited
5.22" 1.6"
1016 Corporate Park Drive
Mebane NC 27302
1-800-880-6788
www.Kidde.com
Distributed by:
P/N: KL-P3010B sheet rev. 03-2013
Part No: I 2 of 5 UPC
Pack Quan-
tity
Dimensions
(w” x d” x h”) Weight
Case/
Skid
Skid
Weight
21010161 100-47871-10052-8 0-47871-10052-1 3-PK (Clam) 7.25 x 1.75 x 11 1 lbs N/A N/A
21010167 100-47871-10067-2 0-47871-10067-5 6-PK (Box) 5.75 x 2 x 6.25 1 lbs N/A N/A