Use and Care Manual
Drill a hole through the pencil
marks and use the enclosed
screws and anchors (see
diagram E) to secure (use 3/16”
drill bit for anchor holes). Align
the Smoke/CO Alarm with the
mounting plate and rotate
clockwise (right) until the unit
is aligned. Screw and anchor
accessories are supplied.
To ensure aesthetic alignment of the alarm with the hallway
or wall, the “A” line on the mounting plate should be parallel
withthehallwaywhenceilingmounting,orhorizontalwhen
wall mounting. See Diagram D.
14
Two labels are included with your alarm. They have important
information on what to do in case of an alarm. Add the
phone number of your emergency provider (Fire Department
or 911) in the space provided. Place one label next to the
alarm after it is mounted, and one label near a fresh air
source such as a door or window.
DIAGRAM D
DIAGRAM E
Operating and Installation Instructions
2505-7231-01(820-1417C).indd 16 2009.8.25 2:12:06 PM