User Guide

NOTE: Dense smoke will override the SMART HUSH
TM
feature and
sound a continuous alarm.
CAUTION: Before using the alarm SMART HUSH
TM
feature, identify
the source of the smoke and be certain safe conditions exist.
8. BATTERY
BATTERY ACTIVATION AND DEACTIVATION
NOTE: One Lithium-Ion battery, permanently sealed inside the alarm, powers this
unit; no battery installation or replacement is necessary for the life of the alarm.
IMPORTANT: Constant exposure to high or low humidity may reduce battery life.
WARNING! DO NOT ATTEMPT TO OPEN THE ALARM
FOR ANY REASON!
Do not try to repair the smoke alarm yourself. No serviceable parts included.
Low battery: This alarm is equipped with a low battery monitor circuit which
will cause the alarm to produce a single “chirp” approximately every 60
seconds and blink the Red LED every 30 seconds, for a minimum of seven
(7) days should the battery become low.
Model P3010B will also issue a voice prompt stating “Low battery.”
THE UNIT MUST BE DEACTIVATED (see “Deactivation of Alarm”
section) and replaced within 7 days of the first occurrence of the
“Low Battery Warning” to provide continuous alarm protection.
9. DEACTIVATION OF ALARM
WARNING!
• Deactivation of the alarm is permanent. Once the alarm has
been deactivated, it cannot be reactivated!
• Once deactivated, the alarm will NO LONGER DETECT SMOKE.
• Once the alarm is deactivated the battery will be depleted and
the alarm will no longer function.
• Once the alarm has been deactivated, it cannot be mounted
onto the mounting plate or reactivated.
WARNING! Failure to turn off alarm as instructed prior to disposal
may create potential for lithium battery related fire or hazard.