Product Overview

Distributed by:
Carbon Monoxide Alarm
Battery Operated with Digital Display
Part Number 900-0146-LP
Model KN-COPP-B-LPM
Technical Specifications
Power Source: Three AA batteries (included)
Sensor: Electrochemical
Audio Alarm: 85dB at 10ft
Temperature Range: 40˚F (4.4˚C) to 100˚F (37.8˚C)
Humidity Range: 10% to 95% relative humidity (RH)
non-condensing
Size: 4.5”L x 2.75”H x 1.5” D
Weight: .66lbs (with batteries)
Interconnects: No
Wiring: No
Warranty: 10 year limited
Architectural and Engineering
Specifications
The carbon monoxide alarm shall be Kidde 900-0146-LP or
approved equal. It shall be powered by three (3) AA batteries
(included). The unit shall have a slide open battery door that
allows immediate access to batteries. The temperature operating
range shall be between 40˚F and 100˚F (4˚C and 38˚C) and the
humidity operating range shall be 10% - 95% relative humidity,
non-condensing.
The CO sensor shall be of a fuel cell design and shall meet
the sensitivity requirements of Underwriters Laboratories UL2034
Single and Multiple Station Carbon Monoxide Alarms.
The alarm can be installed on the surface of any wall or
table top mounted following the UL/NFPA/Manufacturer’s recom-
mended placement guidelines. The alarm shall include a battery
lockout system that deters closure of battery door without using
three batteries.
The unit shall incorporate a digital display that meets the sen-
sitivity requirements of UL 2034. The display will identify the levels
of CO in parts per million (ppm) once that level reaches 30ppm
(i.e.: “abnormal” levels).
The alarm shall include a test button that will electronically
simulate the presence of CO and cause the unit to go into alarm.
This sequence tests the unit’s electronics to ensure proper opera-
tion.
Per UL 2034 requirements, the CO sensor will not alarm to
levels of CO below 30 ppm and will alarm in the following time
range when exposed to the corresponding levels of CO.
70 ppm CO Concentration 60 – 240 minutes
150 ppm CO Concentration 10 – 50 minutes
400 ppm CO Concentration 4 – 15 minutes
The unit shall incorporate 2 LED’s. A green LED will flash
once every 30 seconds to indicate the alarm is operating properly
when power is present. A red LED will pulse to to indicate carbon
monoxide has been detected until the device is reset or CO is
eliminated.
The alarm shall include a piezoelectric horn that is rated at 85
decibels at 10 feet. When the unit detects carbon monoxide, the
alarm pattern will be four (4) short beeps – followed by five (5)
seconds of silence – followed by four (4) short beeps with a cor-
responding red LED flash.
It shall also include a 10-year manufacturer’s limited warranty.
1016 Corporate Park Drive
Mebane NC 27302
1-800-880-6788
www.Kidde.com
P/N: 900-0146-LP sheet rev. 03-2016
2.75”
4.5” 1.5”
Ordering Information
Part Number UPC Pack Quantity Dimensions I 2 of 5 Weight Items/Skid
21008873 0-47871-08873-7 Cut Case (4 units) 7.4"x7.9"12" 100-47871-08873-4 5.1lb 288