Owners Manual

This feature is effective in preventing the removal of the
battery from this device (which will render the unit inopera-
ble during the loss of AC power).
To activate the battery carrier tamper resist feature, remove
the unit from the trim plate, disconnect the AC quick con-
nector and locate the small cut-out in the middle of the
product label on the back of the
unit. With a small screwdriver, or
similar tool, slide the switch
towards the top of the label. (see
Figure 6) The tamper resist fea-
ture is now active and the battery
carrier can not be opened until the
tamper resist feature is deactivated.
FIGURE 6
Operating Instructions
POSTS
FIGURE 5A
FIGURE 5B
18
2540-7201-03(KN-COPE-IC)_V1:_ 2014.11.10 9:44 AM Page 24