Specification

120V AC/DC Wire-in Smoke Alarm
Safety Light
Part# 21006379 Model i12080A
Description
The Kidde i12080A is an AC/DC powered, ionization
smoke alarm that operates on a 120V power source
with 9V battery backup.
This alarm uses ionization sensing technology. Ionization
sensing alarms may detect invisible fire particles
(associated with flaming fires) sooner than photoelectric
alarms. Photoelectric sensing alarms may detect visible
particles (associated with smoldering fires) sooner than
ionization alarms.
Kidde strongly recommends that both ionization
and photoelectric smoke alarms be installed to help
insure maximum detection of the various types of
fire that can occur within the home.
The i12080A includes a quick connect wiring harness
for easy installation. The safety light illuminates to guide
you to safety. This smoke alarm is available in a 6-piece
cut case with tray for easy display. This unit is a UL Listed
product with a 10-year limited warranty.
Install Confidence
Easy Installation
•Frontbatterypulltaballowsbatteryactivation
without removing alarm from mounting bracket.
•Largemountingbasemakesmountingeasier,protects
surface paint from dirt and covers imperfections.
•Pre-strippedwiringharnesswitheasyoffcapdoes
not require stripper tool. Tinned strands increase
conductivity and wire nut grip
Fewer Callbacks
•Onebuttondesignforeasyoperationandless
confusion.OperatesHush™andalarmtest.
•Batteryrundownprotectionwillshutdownalarm
memory when AC power is not present, reducing
low battery chirp.
•Dustcoverprotectssensorfromcontaminates
during construction reducing nuisance alarms
User-Friendly Features
•SafetyLightilluminatesthepathtosafety.
•Tamperresistlockingfeaturedetersalarmtheft
•AlarmmemoryflashesredLEDindicatingwhichunit
was the initiating alarm in interconnected system.
•Batterybackupprovidesprotectionincaseof
power failure.
•Interconnectablewithupto24devices(ofwhich
18canbeinitiating)includingsmoke,COandheat
alarms.Seeuser’sguideforcompleteinstructions.
– Ionization Sensing Technology
– Safety Light
– One button design (operates Hush™ and test)
– Large mounting base
– 9V Battery Backup (included)
– Tamper resist feature
– Alarm memory
– P re-stripped wiring harness with tinned strands
U
L
SIGNALING
LISTED