Cut Sheet

Features and Benefits
• Integrated Photoelectric Smoke Alarm and LED Strobe
Light – A single unit can be installed, where previously a
separate smoke alarm and strobe light were needed. It requires
only one electrical box, reducing labor costs and installation
time. No relay required.
• Low Profile Bright 177 Candela Strobe Light – Light level
proven effective in warning those with hearing loss. Attractive
low profile design.
• Synchronized Flash Rates – Strobe flashes will automatically
synchronize (flash at the same time) with other interconnected
P4010ACLEDS-2 and/or P4010ACLEDSCO-2 alarms. Note: Will
not synchronize during test mode.
• 120V Interconnect with 10-year Sealed Lithium Battery
Backup – Will interconnect with up to 24 other Kidde devices.
Battery backup provides 10 years of continuous protection. Note:
battery backup will only power the smoke alarm.
• Voice Warning – Announces “Fire!” (or “Carbon Monoxide!”
when interconnected with a carbon monoxide alarm or
combination smoke/CO alarm).
• Ambient Light Sensing – Establishes Day/Night cycle and
delays chirping during the night until the next day cycle begins.
• Multi-function One Button Strobe Dome includes:
Hush® Feature – Temporarily silences nuisance alarms for up to
10 minutes (smoke must be present before Hush
®
is activated).
Test Feature –
Simultaneously tests the
unit’s electronics and
verifies alarm operation.
120V AC 2-in-1
LED Strobe and 10-Year Smoke Alarm
Meets ADA Requirements for the Hearing Impaired
Model P4010ACLEDS-2
• Low Profile Bright 177 Candela Strobe Light
• Synchronized Flash Rates
• 10-Year Sealed Battery Backup
(on Smoke alarm)
• Voice Messaging System
• Smart Hush Control
• Stainless Steel Bug Screen
Description
The Kidde P4010ACLEDS-2 is an integrated 120V AC wire-in
smoke alarm with 10-year sealed battery backup and LED strobe
light that provides temporal patterns, visual and voice warnings.
The model P4010ACLEDS-2 is equipped with a 177 candela strobe
light, designed to notify the deaf and hard of hearing. The unique
design measures only 2.3” in height, when mounted.
If smoke is detected, the P4010ACLEDS-2 will produce a steady
flash warning (once per second) and sound 3 long beeps, followed
by “Fire!”, repeating. The LED ring will flash red in conjunction
with the audible beeps.
When triggered by an interconnected carbon monoxide alarm
(this unit does NOT detect CO) it will produce an intermittent
flash warning (4 times every 5 seconds) and sound 4 quick beeps
in time with red LED flashes, followed by “Warning! Carbon
Monoxide! ,” repeating every 5 seconds.
In an alarm condition, strobe flashes will synchronize with other
interconnected P4010ACLEDS-2 and/or P4010ACLEDSCO-2
alarms.
The P4010ACLEDS-2 is UL Listed and has a 10-year limited
warranty.
This alarm uses photoelectric sensing technology.
Photoelectric sensing alarms may detect visible fire particles
(associated with slow smoldering fires) sooner than
ionization alarms. Ionization alarms may detect invisible
fire particles (associated with fast flaming fires) sooner than
photoelectric alarms. Leading authorities recommend that
both ionization and photoelectric smoke alarms be installed
to help ensure maximum detection of the various types of
fires than can occur within the home.
See user guide for additional important information.