User's Manual

TM0081 Page 16 of 51 Issue 1.01
5. CONTROLS AND INDICATION
5.1 PANEL DISPLAY
The Vega LT front panel display is divided into four discrete sections containing the control buttons, zone
windows, status windows and liquid crystal display (LCD). Refer to Figure 14.
Figure 14: Front Panel Display
5.2 CONTROL BUTTON FUNCTIONS
The control buttons located on the panel front perform a number of operations. Refer to Table 3.
Control Button Function
Numeric Keys Allows the user to enter numbers 0 – 9.
Cancel (
←
←←
←
)
Allows the user to answer No, quit menu display options or terminate access levels 2 & 3
completely.
Enter (
↵
↵↵
↵
)
Allows the user to answer Yes, enter menu display options, and confirm input for numeric
information.
Arrow Keys Allows the user to scroll through menu display options, active alarm messages and view
priority pending alarm messages. Also used during programming of the control panel.
Silence Buzzer Silences the internal buzzer for any fire or fault alarm condition.
Scroll Press to display the next alarm message at the current event level.
Delay Override Overrides any pre-programmed delays and immediately operates the outputs.
Silence Alarms Press to turn off All sounder circuits
Reset Press to cancel All fire & fault alarm conditions and reset the system back to normal.
Evacuate Press to turn on All sounder circuits and evacuate the building.
Table 3: Control Button Functions