User's Manual

Component Descriptions
September 2013 2-58 P/N 81-CO2MAN-001
Figure 2-62. Flanged Nozzle Mounting Kit (Duct or Enclosure Mounting)
HOLDING RING
GASKET
FRANGIBLE DISC
(OPTIONAL)
3 FLAT
HEAD SCREWS
3 BOLTS
3 LOCKWASHERS
TYPICAL TYPE “S”
FLANGED NOZZLE
3 TAPPED HOLES
120 DEGREES APART
TAPPED RING
3 DRILLED HOLES
120 DEGREES APART
3 DRILLED HOLES
120 DEGREES APART
HOLDING RING
3 LOCKWASHERS
3 HEX NUTS
BOLTS - 5/16 - 18 x 1/2 in.
FLAT HEAD SCREWS - 5/16 - 18 x 7/8 in.
LOCKWASHERS - 5/16
HEX NUTS - 5/16 - 18