User's Manual

Component Descriptions
September 2013 2-56 P/N 81-CO2MAN-001
Figure 2-60. Multijet Nozzle, Type S Flanged
2-7.1.1 FLANGED NOZZLE MOUNTING KIT, TYPE S NOZZLE
The flanged mounting kit, Part No. 81-803330-000 (Figure 2-61, Figure 2-62 and
Figure 2-63), contains two holding rings and a gasket (Part No. WK-201004-000) required to
install a frangible disc on the S-nozzle outlet, or for installation of this nozzle to a duct or an
enclosure.
Table 2-28. Flanged Nozzle Mounting Kit BOM
Description Quantity
Disc, Aluminum, Part Number WK-310020-000 2
Gasket, Part Number WK-201004-000 1
Ring Tapped 1
Ring Holding 2
Bolt, 5/16 in. -18 x 1/2 in. 3
Flat Head Screw - 5/16 in. -18 x 7/8 in. 3
Lockwasher — 5/16 in. 6
Nut, Hex 5/16 in. -18 3
2 OR 4 ORIFICES
1-1/8 in. (29 mm) HEX
1/2 in. NPT FEMALE
THROAT
NOZZLE CODE NUMBER
STAMPED HERE
5 in.
(127 mm)
4-1/4 in.
(108 mm)
STRAINER - INCLUDED
IN TYPE “S” NOZZLES
WITH NOZZLE CODE
NOS. FROM 2 TO 5+