User's Manual

Component Descriptions
September 2013 2-26 P/N 81-CO2MAN-001
2-3.3.8 DUAL PULL EQUALIZER
The dual pull equalizer, Part No. 81-840051-000 (Figure 2-30), is used to equalize the force
transmitted via a pull cable to two separate remote control head locations. It contains a pulley
mechanism to equalize the cable travel to assure that the control heads fully actuate at both
locations.
Figure 2-30. Dual Pull Equalizer
2-3.3.9 1/16-INCH PULL CABLE
The 1/16-inch Pull Cable functions as a control cable used to interconnect mechanically
actuated components. The cable is made of 1/16-inch O.D., stainless-steel having a multi-
strand construction and is available in the lengths identified in Table 2-7.
Table 2-7. 1/16-inch Pull Cable Lengths
Length (feet) Part Number
50 06-118316-050
100 06-118316-100
250 06-118316-150
350 06-118316-350
500 WK-219649-000
1/16 in. CABLE
CABLE PULLEY WITH SET SCREW
12 in.
(305 mm)
10 in.
(254 mm)
(4) MOUNTING HOLES
1/16 in. CABLE
2-1/4 in.
(57 mm)
2 in.
(51 mm)
2-5/8 in.
(67 mm)
3-1/4 in.
(83 mm)
(2) 3/8 in. NPT
FEMALE OUTLETS
HOUSING
USE 3/32 in. HEX KEY FOR CABLE
PULLEY SET SCREWS
(3) 3/8 in. NPT
FEMALE OUTLETS
2 BRASS PLUGS SUPPLIED
WITH DUAL PULL EQUALIZER
3/8 in. PIPE
DIRECTION OF PULL
HOUSING COVER