User's Manual

Component Descriptions
P/N 81-CO2MAN-001 2-25 September 2013
Figure 2-28. Cable Housing
2-3.3.7 DUAL PULL MECHANISM
The dual pull mechanism, Part No. 81-840058-000 (Figure 2-29), performs a similar function
as the tee pulley. It is used to branch a pull cable line to two remote release stations, and is
used for cables that are run in 3/8-inch pipe.
Figure 2-29. Dual Pull Mechanism
Table 2-6. Cable Housing Part Numbers
Part Number
Cylinders Used With Cylinder Centers “A” Dimension
lb. kg in. mm in. mm
WK-331570-000 25-35 11.3 - 15.8 9.5 241 5.12 130
WK-202355-000 50 - 75 22.6 - 34.0 10.0 254 5.62 143
WK-200822-000 100 45.3 11.625 295 7.12 181
A
FLARED
3/8 in. NPS MALE
1/16 in. CABLE
CABLE CLAMP WITH SET SCREW
12 in.
(305 mm)
10 in.
(254 mm)
(4) MOUNTING HOLES
1/16 in. CABLE
2-1/4 in.
(57 mm)
2 in.
(51 mm)
2-5/8 in.
(67 mm)
3-1/4 in.
(83 mm)
(2) 3/8 in. NPT
FEMALE OUTLETS
HOUSING
USE 3/32 in. HEX KEY FOR CABLE
PULLEY SET SCREWS
(3) 3/8 in. NPT
FEMALE OUTLETS
2 BRASS PLUGS SUPPLIED
WITH DUAL PULL EQUALIZER
3/8 in. PIPE
DIRECTION OF PULL
HOUSING COVER