User's Manual

Component Descriptions
September 2013 2-16 P/N 81-CO2MAN-001
Arrangement C: This style (Figure 2-18) provides for a double row of cylinders on the same
side of the framing. This arrangement can be free standing or wall mounted. It is generally
used when the cylinders are to be wall mounted and sufficient space is not available to arrange
them in a single row.
Figure 2-18. Multiple Cylinder Mounting, Arrangement C
Larger quantities of cylinders can be accommodated by adding additional framing. All framing
is supplied with pre-drilled mounting holes. Any combination of cylinder stowage, junction box
installation, pneumatic selector valve installation and cylinder manifold support can be
accommodated by the holes in the framing. All bolts and nuts are supplied as part of the
framing. Drilling is not required at the job site in order to erect the bracketing. In addition the
cylinder manifolds are arranged to be fastened to the framing.
2-2.6.2.1 Cylinder Rack and Framing, Example Arrangement
The components comprising a single-row rack and frame (Arrangement A) for six cylinders
(Framing Kit 81-010001-006) are identified in the highlighted column of Table 2-5 and
illustrated in Figure 2-19. Complete parts information concerning the components required for
all single- and double-row rack and framing arrangements are contained in Table 8-19,
Table 8-20 and Table 8-21 and illustrated in Figure 4-4 through Figure 4-20
SERVICING
AISLE
50, 75 or 100 lb.
OMIT CYLINDER
HERE FOR ODD
NUMBER