User's Manual

Component Descriptions
September 2013 2-10 P/N 81-CO2MAN-001
Figure 2-9. Installation of Grooved Nut Discharge Head to Cylinder Valve
PILOT PRESSURE PATH
IN DISCHARGE HEAD
STEM
OUTER O-RING
PILOT PRESSURE PATH
IN VALVE
PILOT PORT
PILOT CHECK
TYPICAL SIPHON TUBE
PISTON
GROOVED NUT
DISCHARGE HEAD
STOP CHECK
DISCHARGE OUTLET
PILOT PRESSURE HERE
WILL DISCHARGE THIS
CYLINDER.
NOT
INNER O-RING
IDENTIFYING GROOVES
IN SWIVEL NUT
MAIN CHECK
SAFETY OUTLET
TYPE “I” CYLINDER
VALVE (SEE K-1050)
TYPICAL CYLINDER
NEVER CONNECT DISCHARGE HEAD TO CYLINDER
VALVE WITHOUT FLEX LOOP ATTACHED TO
DISCHARGE OUTLET AND CONNECTED TO SYSTEM
PIPING. ARRANGEMENT AS SHOWN IS FOR
ILLUSTRATION PURPOSES ONLY.
CAUTION