Manualshelf

User's Manual

ManualsBrandsKidde Fire Systems ManualsSurge ProtectorKidde Fire Systems Kidde Fire Systems Surge Protector P/N 81-CO2MAN-001
41424344454647484950
Component Descriptions
P/N 81-CO2MAN-001 2-9 September 2013
Figure 2-8. Discharge Head, Grooved Nut
WARNING
The discharge head must be permanently connected into the system piping.
Never attach the discharge heads to the cylinder valves until the cylinders are
secured in brackets or racking. Under no circumstances is the discharge head
to remain attached to the cylinder valve after removal from service, during
shipment, handling, storage, or during filling. Failure to follow these
instructions could result in serious bodily injury, death, or property damage.
2-5/8 in.
(66 mm)
SPRING
3/4 in. NPS
DISCHARGE OUTLET
2 1/2 - 14N3
OUTER O-RING
P/N WF-242466-000
INNER O-RING
P/N WF-242467-000
STEM
SET
POSITION
PISTON
IDENTIFYING
GROOVES IN
SWIVEL NUT
SWIVEL NUT
(FOR CONNECTION
TO CYLINDER VALVE)
OPERATED
POSITION
3-15/16 in.
(100 mm)