User's Manual

P/N 81-CO2MAN-001 C-1 September 2013

APPENDIX C

EUROPEAN EQUIPMENT

C-1 INTRODUCTION

Kidde Fire Systems CO

equipment sold into the European Union must comply with Pressure

Equipment Directive (PED) 97/23/EC and Transportable Pressure Equipment Directive (TPED)

1999/36/EC. Refer to Table C-1 for a list of equipment.

Equipment, such as discharge heads, flex hoses, check valves, etc., that will be exposed to

pressure during a discharge shall be PED approved. PED approval is indicated by the CE mark

affixed to these components.

Equipment, such as cylinders and discharge valves, that retain pressure while during transport,

shall be TPED approved. TPED approval is indicated by the PI mark affixed to these components.

Table C-1. TPED and PED Approved Equipment for European Community Only*

Part No. Description

81-870287-002 75 lb. CO

Cylinder and Valve Assembly- "Pi" marked and CE approved

81-870269-002 100 lb. CO

Cylinder and Valve Assembly - "Pi" marked and CE approved

WK-981372-002 1/2-inch I-Valve - TPED Approved

WK-840253-002 5/8-inch I-Valve - TPED Approved

81-897494-001 Electric/Cable Control Head, 24 VDC ATEX/CE (NOT UL/FM)

81-100000-001 Explosion Proof Electric Control Head, Stackable, 24 VDC, ATEX Approved

* Component Equipment Only