User's Manual

Installation
P/N 81-CO2MAN-001 4-19 September 2013
Figure 4-16. Cylinder Racks (100 lb. Capacity), Single Row
FOR 3 MAIN & 3 RESERVE CYLINDER ARRANGEMENT
FOR 5 MAIN & 5 RESERVE CYLINDER ARRANGEMENT
FOR 7 MAIN & 7 RESERVE CYLINDER ARRANGEMENT
NOTE:
INSTALL CYLINDER ROD AND FRONT
CLAMP BETWEEN EACH CYLINDER
11-5/8 in. CENTERS
APPROX. 7 in.
½ in.-13 X 1 in. LG. BOLT
WK-149132-480
1/2 in.-13 NUTS - WK-151932-000
FOR UNEVEN NO. OF CYLINDERS START WITH TWO RODS THEN CONTINUE WITH RODS
BETWEEN EVERY OTHER CYLINDER (SEE FRAMING DWG. FOR ARRANGEMENT)
PLAN
TYPICAL ARRANGEMENT FOR EVEN NO. OF CYLINDERS
1/2 in. -13 X 11 in. LG.
ROD - WK-243795-000
CYLINDER FRONT CLAMP
WK-241105-000
8 in.
13-5/8 in.
1/2in. -13 NUT - WK-151932-000
(UNDER CHANNEL TO SECURE
RODS & BOLTS)
CHANNEL SUPPORT
WK-207281-000
CYLINDER CHANNEL (VARIOUS
LENGTHS OF 3, 4 AND 5 CYL. SECTIONS)
POST CHANNEL
WK-271556-000
(2) 1/2 in. WASHERS - 1
WK-157732-000 (THIS END ONLY)
CYLINDER CRADLE - WK-271561-000
(CUT OFF CORNER INDICATES
LONGER LEG)
3/8 in.-16 X 1 in. LG.
BOLT AND NUT
WK-149124-160 AND
WK-151924-000
FRONT VIEW