User's Manual

Installation
September 2013 4-12 P/N 81-CO2MAN-001
Figure 4-9. Cylinder Racks (50 and 75 lb. Capacity), Double Row (One Side)
NOTE:
THESE PARTS WILL BE SUPPLIED FOR "MAIN" & "RESERVE" SYSTEMS ONLY.
THE PARTS WILL SECURE THE REAR ROW "RESERVE" CYLS. WHEN THE FRONT ROW "MAIN" CYLS. ARE REMOVED FOR RECHARGING.
USE ONE SPACER CLIP PER ROD, AND SECURE WITH NUT SUPPLIED.
CAUTION:
BE SURE THE ROD END THREADED FOR 8" IS TOWARDS THE FRONT OF THE FRAMING
1/2 in. -13 NUT - WK-151932-000
UNDER CHANNEL TO SECURE RODS
CHANNEL SUPPORT - WK-207281-000
CYLINDER CHANNEL (VARIOUS LENGTHS)
POST CHANNEL - WK-241217-000
1/2 in. -13 X 9-13/16 in. LG. ROD
WK-207282-000 (FOR ODD CYL. AS SHOWN)
CYLINDER CRADLE - WK-241103-000
(CUT OFF CORNER INDICATES
LONGER LEG)
ODD CYLINDER END CLAMP
81-241212-000 (IDENTIFIED BY CUT
OFF CORNER)
CYLINDER SPACER - 81-270582-000
1/2 in. -13 X 20-3/8 in. LG. ROD
WK-242441-000 (FOR STD. SYSTEMS)
CYL. END CLAMP - WK-241104-000
CYL. FRONT CLAMP - WK-241105-000
SPACER
SPACER
SPACER CLIP - 81-242442-000
1/2 in. -13 NUT - WK-151932-000
1/2 in. -13 X 20-3/8 in.
LG. ROD - WK-242441-000
3/8 in.-16 X 1 in. LG.
BOLT AND NUT
WK-149124-160 AND
WK-151924-000
10 in. CENTERS
APPROX. 6 1/2 in.
PLAN
FRONT VIEW
SEE
NOTE
BELOW
(2) 1/2 in. WASHERS - WK-157732-000
(THIS END ONLY)