User's Manual

Installation
P/N 81-CO2MAN-001 4-9 September 2013
Figure 4-6. Cylinder Racks (50 and 75 lb. Capacity), Single Row
10 in. CENTERS
APPROX.
6-1/2 in.
½ in. - 13 X 1 in. LG. BOLT
WK-149132-480
1/2 in. - 13 NUTS - WK-151932-000
FOR 3 MAIN & 3 RESERVE CYLINDER ARRANGEMENT
FOR 5 MAIN & 5 RESERVE CYLINDER ARRANGEMENT
FOR 7 MAIN & 7 RESERVE CYLINDER ARRANGEMENT
NOTE:
INSTALL CYLINDER ROD AND FRONT
CLAMP BETWEEN EACH CYLINDER
FOR UNEVEN NO. OF CYLINDERS START WITH TWO RODS THEN CONTINUE WITH RODS
BETWEEN EVERY OTHER CYLINDER
PLAN
TYPICAL ARRANGEMENT FOR EVEN NO. OF CYLINDERS
1/2 in. -13 X 9-13/16 in. LG.
ROD - WK-207282-000
CYLINDER FRONT CLAMP - WK-241105-000
1/2 in. -13 NUT - WK-151932-000
(UNDER CHANNEL TO SECURE RODS & BOLTS)
CHANNEL SUPPORT - WK-207281-000
CYLINDER CHANNEL
(VARIOUS LENGTHS)
POST CHANNEL - WK-241217-000
(2) 1/2-in. WASHERS - WK-157732-000
(THIS END ONLY)
CYLINDER CRADLE - WK-241103-000
(CUT OFF CORNER INDICATES
LONGER LEG)
3/8 in. -16 X 1 in. LG.
BOLT AND NUT
WK-149124-160 AND
WK-151924-000
FRONT VIEW