User's Manual

Component Descriptions
P/N 81-CO2MAN-001 2-73 September 2013
2-8.9 Weigh Scale
A weigh scale, Part No. 81-982505-000 (Figure 2-79) is available for weighing the CO
2
cylinders in place without disconnecting them from the cylinder manifold. The weigh scale is
used in conjunction with the weigh bars that form part of the framing.
Figure 2-79. Weigh Scale
2-8.10 Recharge Adapter
The recharge adapter, Part No. WK-933537-000 (Figure 2-80), is used to fill the CO
2
cylinder
assemblies. The adapter is attached to the cylinder valve pilot port connection during cylinder
charging.
Figure 2-80. Charging Adapter
21 in.
(533 mm)
NOT INCLUDING CLEARANCE FOR
OPERATOR
ADJUSTMENT SLEEVE
WEIGHBAR
BEAM
DISCHARGE HEAD
YOKE
CARBON DIOXIDE CYLINDER
FINGER GRIP
RING
SCALE IS
CALIBRATED IN
POUNDS
POINTER INITIAL
POSITION
FINAL POSITION
WEIGHING SCALE
8-1/4 in. (210 mm) DIA.
ROTATED 90 DEGREES
FOR CLARITY
INITIAL POSITION
7/8-14 NS-3 THREAD
FOR ATTACHMENT TO
RECHARGE SYSTEM
KNURLED SWIVEL NUT
WITH VENT HOLES
O-RING
1-1/4 - 18 NS-3 THREAD
FOR ATTACHMENT TO
VALVE PILOT PORT
2-1/2 in.
(64 mm)
1-1/2 in.
(38 mm)
VENT HOLES - DO