Smoke Alarm User Manual

Installation, Operation and Maintenance Manual
Page 5-14 Issue 1
February 2001
5.25 Final touches
5.25.1 Air-Sampling Pipe Labels
The air-sampling pipe network must be marked with identification labels. These labels should be applied
to the pipework every ten feet (maximum).
5.25.2 Sample Port Labels
This label is placed adjacent to sample holes drilled into the walls of air-sampling pipe network. Each
sample port must be labelled.
5.25.3 Sample Point Labels
This label is used to identify sample holes drilled into the end cap of an extended sample point. Each
sample point must be labelled.
5.25.4 Mini Sample Point Labels
This label is used to identify sample hole drilled into the Mini Sample Point. Each mini sample point must
be labelled. Mini sample point labels come as part of a mini sample point kit in rolls of 25.