Smoke Alarm User Manual

Installation, Operation and Maintenance Manual
Issue 1 Page 3-5
February 2001
If the system is in any state other then NORMAL (i.e. Alarm and Trouble) the following options are
available scrollable in the following order:
SILENCE
RESET
STATUS
SMOKE
AIRFLOW
ISOLATE
START TEST
EXIT
The control keys are detailed below with a description of their operation.
LEFT UP DOWN RIGHT ENTER
The <RIGHT> and <DOWN> cursor control keys perform the same function, namely to scroll to the next
menu option. The <LEFT> and <UP> cursor control keys perform the same function, namely to scroll to
the previous menu option.
Pressing the enter key whilst a menu option is displayed causes that system function to be performed
(provided a valid password is entered). Any number of functions can be performed without the need to
re-enter the password.
If, after entering the password the operator does not press any key for 1 minute then the validity
of the password will time-out and will need to be re-entered.
The EXIT system function is used to exit the menu display and return to the STATUS screen. This
effectively terminates this session and any further function requests from the menu screen will require the
password to be entered again.
From the system STATUS screen if a fault condition exists on the system then the Smoke Information is
automatically displayed without any operator input required. The operator can then have access to the
menu in the normal manner as outlined above.
Detailed below are examples of the various types of information that can be detailed on the Display.
The Status Information screen appears as shown.