Smoke Alarm User Manual

Installation, Operation and Maintenance Manual
Page 3-4 Issue 1
February 2001
Operation of any of the control keys on the Display Module will cause the Menu screen to be displayed.
The Menu screen displays the allowable system functions via a
scrollable menu. Highlighting is used to indicate the current
selection.
However, prior to the system functions being performed, the Password Entry screen is displayed and the
operator is required to enter the relevant password.
The password is entered by highlighting the required digit (using
the cursor control keys) and then pressing the enter key to
accept. As each digit of the password is selected a * is displayed
on the screen. By selecting ‘←’ (backspace), the operator is able
to delete previously incorrectly entered digits. The password field
is a maximum of eight digits and a minimum of three. Once the
required number of digits for the password has been entered the
9 can be highlighted and selected by pressing the enter key.
Once operated the password selection will be verified.
Once verified, the requested system function can be performed. It should be noted that only the TEST,
ISOLATE, RESET and SILENCE functions require a password to be entered before they can be
performed. The menu options available to the user are dependent on the current system status.
If the system is NORMAL then the following options are available, scrollable in the following order:
STATUS
SMOKE
AIRFLOW
ISOLATE
START TEST
EXIT