Owner's Manual

To be performed by a supervising adult
Before every ride, it is important to carry out the following
safety checks. Do not ride a baery-powered ride-on toy that is
not in proper working condion! Replace any worn or broken
parts as needed.
Steering and Control
The steering wheel or handlebars are ghtened and secured
in the mount or dashboard.
The steering wheel or handlebars are posioned so that the
rider can easily operate and steer the ride-on. There must
be no diculty for the rider in turning and/or operang the
powered foot pedal or hand operated push buon.
The steering wheel or handlebars are aligned so that the
steering column and front wheels are oriented in the same
direcon.
Wheels
The wheels are securely aached to the baery-powered
ride-on and they are in good condion. It is acceptable to
have slight lateral movement in each wheel.
The wheels have no holes or are not worn down in any one
area and that the tracon strips are intact and secured to
the wheels.
The drive wheel is securely fastened to the gear box, which
houses the motor.
Ride-on
For all electrical components, make sure:
• The baery is fully charged.
• The charging cord is NOT aached to the ride-on in
any way.
• All connectors are securely snapped in place and will not
come detached while riding.
• No wiring is exposed, worn, or detached in any way; the
motor is not hot to touch.
• All electrical buons, including the power buon,
accelerator foot pedal or hand operated buon, and any
buons for lights and sounds, work properly.
• If the ride-on’s electrical components show any sign of
damage or missing parts DO NOT RIDE unl the condion
is corrected.
Make sure the ride-on is:
• Clean, dry, and in good condion.
• All plasc pieces, including fenders, seat, footrests,
steering wheel or handlebars, wheels, bumpers, and/or
hub caps are securely aached.
• There are no cracks or structural problems on the
ride-on toy.
• If the ride-on toy shows any sign of damage or missing
parts DO NOT RIDE IT unl the condion is corrected.
Make sure all safety labels are in place and readable, and
understood by the rider.
4 5
Required Tool
Hardware bag
Part name Qty
A Seat 1
B
Seat screws 4x14 (packed in hardware bag) 2
C
Zero-Turn ride-on body 1
D
An-pping bracket 1
E
Tip over bracket screw 4x35 (packed in hardware bag) 2
F Wheel washer (aached to axle) 2
G
Wheel nut (aached to axle) 2
H
Hub cap 2
I
Large mower blade washer (aached to mower body) 4
J
Mower blade assembly 1
K Small mower blade washer (aached to mower body) 4
L Mower blade nut (aached to mower body) 4
M Front wheel 2
N Rear axle 1
O Front wheel washer (aached to wheel) 2
P Front wheel lock washer (aached to wheel) 2
Q Front wheel bolt (aached to wheel) 2
R Front wheel cap (packed in hardware bag) 2
S Steering lever nut (packed in hardware bag) 2
T Steering lever bolt (packed in hardware bag) 2
U Steering lever 2
V Baery charger 1
W Wrench 2
Pre-ride Safety Checklist
Parts Checklist
Parts
Before you begin assembling, check that all parts listed are present..
x2
x2
x2
(not included)
x2
x2
A
T
T
S
B
R
E
B
U
S
O
P
Q
R
C
I
J
K
M
N
L
D
F
E
G H
V
W